Tools - Specialty Tools |
|
|
1
| 2
Next >
|
|
 |
ARC360 HOLE CUTTERThe tools on the market for cutting lightning holes in your airframe parts have never impressed me much especially if the holes are larger than a couple of inches in diameter. Panel knock put punches and hole saws work well for holes that are aren’t too big but it gets harder and more expensive as the size of the hole increases. Click here to view more details. |
| 12-01977 | NOAH ARC-360 HOLE CUTTER | $98.95 | 
| |
|
|
 |
DECAL ERASER WHEELFor quick and easy removal of decals, pinstripes, bumper stickers, reflective tapes etc from glass and OEM painted surfaces without any damage. Also very effective in removing adhesive tapes and glue from the back of moldings. Click here to view more details. |
| 12-02401 | DECAL ERASER WHEEL 4" ERW | $14.85 |
| |
|
|
|
 |
GUPPIE MULTI-TOOL BLACKLaunce Barber and Tom Stokes designed the patented Guppie™ as part of their innovative I.D. Works™ line of tools. While some think it's cute, it really is a hard-working carabiner tool with dozens of everyday uses. Click here to view more details. |
| 13-07358 | GUPPIE MULTI TOOL BLACK | $38.95 |
| |
|
 |
BOGERT COMANCHE
BUNGEE TOOLLower damage risk with the right tool. Complete control of bungee shock cords coming off. Complete control of bungee shock cords going on. E-Z instructions with detailed drawings. Safe landings depend on new cords every few years. Click here to view more details. |
| 06-00419 | BOGERT STRETCHING TOOL | $79.85 |
| |
|
|
 |
PIPER CONTROL YOKE
TAPER PIN TOOLSweating the Piper Control Wheel AD? Relax, this patent pending M-4 tool makes the hardest part of compliance with this AD easy. This specialty tool was designed to counter the frustration of removing the Piper control wheel taper pin. Click here to view more details. |
| 12-02620 | PIPER CNTRL YOKE TAPERPIN TOOL | $249.00 |
| |
|
 |
ADEL CLAMP KEEPERPrecision slots on this spring steel tool slide onto and capture #8 or #10 screw threads while assembling Adel type clamps, permitting free hands to start a nut and finish tightening the clamp. Click here to view more details. |
| 12-02588 | CLAMP KEEPER TOOL | $12.65 |
| |
|
 |
TURNBUCKLE CHAIN TOOLThis tool consists of two clamps joined by sprocket type (bicycle) chain. When clamped to cable and fittings at each side of the turnbuckle, anchor the cable to allow free adjustment of the turnbuckle. The adjustment becomes a two hand instead of three hand adjustment. Click here to view more details. |
| 12-01794 | ECON TURNBUCKLE CHAIN TOOL | $25.75 |
| |
|
|
 |
CESSNA COWLING FASTENER DRIVERSlotted type cowling fasteners are not easy to fit with generic common screwdrivers. To overcome this, this driver has a broad hollow cut tip that accurately engages the drive slot. Additionally, a no mar, spring loaded, plastic sleeve simultaneously guides the tip by fitting around the outside diameter of the fastener head. Click here to view more details. |
| 12-17615 | CESSNA COWLING FASTENER DRIVER | $22.85 |
| |
|
|
 |
BLIND SKIN SCRIBEFor use on flush skin butt joints. This tool quickly and easily finds the cut line on the overlap of new metal. The lower leg slides under the new metal and hooks on the adjacent skin and the upper leg scribes the new skin as it pulled along. Click here to view more details. |
| 12-00746 | BLIND SKIN SCRIBE | $33.75 |
| |
|
 |
BENDIX MAG LOCKThis Bendix Mag Lock works on S4 and S6 and other Bendix Mags. To use simple place a cotter pin loosely into lower plunger hole. Screw sleeve into magneto case. Align red slot in plunger parallel to mag tooth gear. Remove cotter pin to engage gear tooth. Click here to view more details. |
| 12-02243 | BENDIX MAG LOCK | $53.75 |
| |
|
|
 |
S4-3 RACE REMOVAL TOOLThe S4 magneto seal installation, inner and outer race installation tool is three tools in one and is proportioned in such a way that it is easily accommodated by most small bench arbor presses. Click here to view more details. |
| 12-17603 | S4-3 RACE REMOVAL TOOL | $89.75 |
| |
|
|
 |
15-INCH BULLSEYE PICK The bullseye pick was originally used in the dent repair/collision trade, but also works great for restoration work. These are ideal to reach in around the edge of a panel, around a gusset, or into a blind area to repair the dent from the backside. Click here to view more details. |
| 12-02292 | 15" BULLSEYE PICK | $89.50 |
| |
|
|
 |
S4-2 RACE REMOVAL TOOLThe S4 magneto drive end inner race removal tool works in conjunction with a standard bearing puller. The split gripper ring fits behind and around the race and is captured in the puller ring by two opposing set screws. A groove on the puller ring provides the point of attachment for the puller arms. Click here to view more details. |
| 12-17602 | S4-2 RACE REMOVAL TOOL | $127.95 |
| |
|
 |
PITOT TUBE INSTALL TOOLThis tool was developed, in response to fleet owner and FBO requests. They were having experienced difficulty installing Covers onto high wing Pitot Probe locationss, e.g., Cessna Caravans, Bush aircraft with Tundra tires, float planes and amphibians. In field trials it was found that this tool is also very useful to install-remove the same Covers onto over-the-nose Pitot Probes, of VeryLite and commercial jet aircraft! Click here to view more details. |
| 13-06672 | PITOT TUBE INSTALL TOOL | $78.50 |
| |
|
 |
SKYBOLT 4P3-SP5 COMBO TOOLA must to install CLoc® or Camloc® 4000 Series studs into grommets. Also handy to install 2000 Series Studs, including winged studs. Cushioned grip handles. Grip jaws are milled precisely to fit 4000 Series cups perfectly! Click here to view more details. |
| 08-07224 | SKYBOLT 4P3-SP5 COMBO TOOL | $74.85 |
| |
|
1
| 2
Next >
|
|
